FP 036 – WINDMÖLLER & HÖLSCHER NOVOFLEX CM, year 2018

Description

CI FLEXO PRESS – 7C+1C (kept free for easy CI cleaning) – PRINTING WIDTH 1650 mm
Machine can be shown in operation ! VIDEOS available

General specifications for the entire machine
Mileage Kilometer 420650
Operation Time h 17519
Web width, max. mm 1700
Adapter/Sleeve width, max. mm 1680
Printing width, max. mm 1650
Print repeat range mm 440 – 1250
Roll diameter, max. mm 1300
Max. roll weight at the unwind kg 2850
Max. roll weight* at the rewind (*depends on Winding Shaft) kg *
Core inner diameter mm 76
Core outer diameter mm 85
Web tension range downstream of the unwind N 25 – 450
Web tension range, rewind – without slitter operation N 25 – 450
Web tension range, rewind – with slitter operation N 40 – 450
Web tension range, draws N 25 – 450
Machine speed, max. (The machine speed depends on job-specific and print-related factors.) m/min 600
Colordecks pcs 8

Power supply
Connected load KVA 300
Electrical heating, approx. KVA 415

Cooling water requirements
required per chill roll, approx. m3/h 3,0
Temperature control unit, max. m3/h 4
required for max. ink cooling m3/h 9,6

Compressed air
Pressure (overpressure) kPa 600
Permanent use m3/h 12
Turboclean approx. (with ink mixer integrated in the cover) max. m3/h 80
Sleeve change approx. (for each sleeve change normally lasting less than one minute) max. m3/min 4,3

Drying system (electrically heated)
Make-up air volume – between-color, max. approx. m3/h 11,940
Make-up air volume – tunnel, max. approx. m3/h 18,150
Exit air volume with increased solvent concentration, min. m3/h 7,600
Exit air volume with increased solvent concentration, max. m3/h 20,700
Exit air temperature, approx. °C 83
Fresh-air volume – between-color, min. m3/h 3,580
Fresh-air volume – tunnel, min. m3/h 2,200
Additional fresh-air volume – between-color, max. m3/h 6,000
Additional fresh-air volume – tunnel, max. m3/h 6,000
Fresh-air temperature, approx. °C 30
Heating capacity – between-color, approx. (at max. make-up air volume, max. fresh-air volume) kj/h 492,000

Heating capacity – tunnel, approx. (at max. make-up air volume, max. fresh-air volume) kj/h 718,000
Nozzle air exit temperature – between-color, max. °C 100
>with heating switched off, ambient temperature plus °C 25
Control deviations after setting the nozzle air exit temperature, electrical heating °C +/- 2
Nozzle air exit speed, between-color m/s 40 – 70
BCD Units pcs 8
Nozzle air exit temperature – tunnel, max. °C 140
>with heating switched off, ambient temperature plus °C 25
Control deviations after setting the nozzle air exit temperature, electrical heating °C +/- 2
Air exit speed, tunnel m/s 30 – 50
TD length m 8
TD nozzle pcs 30

Emission sound pressure level
Emission sound pressure level, max. dB (A) <80
Noise measurement in compliance with EN 13023 / DIN EN ISO 3746 / DIN EN ISO 11204 at a distance of 1m from the machine surface at a height of 1.6m.The emission sound pressure level guarantee is invalidated if additional units are incorporated in the
machine which do not form part of W&H’s scope of supply.

Materials to be printed
Non-woven fabric g/m2 10 – 100
Paper g/m2 30 – 120
Films, Laminates g/m2 12 – 120
Films, Laminates µm up to 150
LDPE, PP µm 20 – 150
HDPE, OPP µm 12 – 100
PET, OPA, BOPP µm 10 – 30

Standard solvents
Alcohols to % 100
Ester to % 100
Glycol ether to % 40
Ketones to % 5
no hydrocarbons (benzene, cyclohexane, toluene)
PH value 4-9
Inks
NC, PVB, 2K and water-based inks having a PH value of 4-9*
*When using different ink systems or in case of PH values >9 it may be recommendable to use additional equipment.

Special Features
Lifting Table to feed roll (on floor or under floor) W&H V
Unwinder Core size in ” Vorwald Neuenhauser 3″ ; 6″
20kW Corona Treater with Stainless steel electrodes and Silicone isolation roller AFS X
Data Store Function for Corona Treater [Trend-Historical Data] – “AFS Lookback” AFS X
Infra Red Sensor (OS & DS) for Weg Guide Control after the unwinder BST V
Inking System – High Efficency Diaphragm pumps with automatic frequency control Timmer Pumps (W&H) X
Inking System – High Efficency Electrical pumps without pulsing and automatic frequenbcy control Electrical Pumps (W&H) V
Ink Viscosity and Temperature Control (cooling) System Automatic IncSpec (W&H) V
2nd colorsystem ready [2nd set of Cleaning Agent Tank and Dirty Ink Tank] W&H V
Water Based Inks & Solvent Based Inks can be used [stainless steel inking system] W&H V
LEL Control for Drying System W&H V
Blower Speed (Airspeed @ Blower Nozzle) Control W&H V
Easy Set S [Static Print Impression Setup @ 2m/min] W&H V
Automatic CI-Cleaning System Rossini V
30 driven Tunnel Dryer idle roller (for low tension materiasl) W&H V
Automatic Color to Color registration (EMI-interface) [in standstill speed – waste reduction] BST/Eltromat V
100% Webinspection – IPQ-Check System [100% Linecamera + UHD Matrix Camera] BST/Eltromat V
BST Quality Assistant (Software) BST/Eltromat V
Additional Line-Sensor for Weg Guide Control infront of rewinder BST V
Tangential Slitting System incl. Spreader roller and tension control W&H V
Shear Slitting Units [19Units for max. 18 lanes each min. 60mm] incl. digital positioning tool Maxess/Five Tidland V
Low Tension Package [down to 25N] W&H V
Bow-spreader roller (2 pcs) Kickert V
Additional Draw Control Unit infront of Rewinder [for optimal tension control on low weight substrates] W&H V
Full Webwidth Metal Detection Mesutronic V
Laser positioning system for cores on winding shaft W&H V
Rewinder Winding Shaft Core size in ” (each size 2 pcs) Double E 3″ ; 6″
Lifting Table to unload rolls (on floor or under floor) W&H V
UPS System for entire machine Wöhrle V