CST 233 – SML Castfilm Co-Extrusion Line for the production of CPP Film, Stretch Wrap Film and Barrier Film 3 Layer, Film width max. 2.800 mm with EREMA Recycling Plant

The line is in very good condition, available immediately and can be seen in production

UPGRADES – Thickness Gauge EUROTHERM GAUGING SYSTEM to NDC (AccuTrak Scanner Mod. FG710), year 2011
Recycle System Erema off-line changed to Tria system in-line, year 2009.
Web Oscillate modify by local Engineering team

General Information
Year 2003
Extruder A 120/33 – PP / LDPE / LLDPE
Extruder B 75/33 – PP / LDPE / LLDPE
Extruder C 75/33 – PP / LDPE / LLDPE
Stretch Wrap Folie
LLDPE 2-3g/10 min bei 190°C/2,16kg
CPP-Folie
PP 7-9g/10 min bei 230°C/2,16kg
CPE-Folie
LLDPE 1g/10 min bei 190°C/2,16kg
PP 2g/10 min bei 230°C/2,16kg
The maximum endfilm width which can be produced on this cast film line is
Stretch Wrap Folie 5 x 500mm
CPP Folie 2650mm
CPE-Folie 2800mm
the maximum endfilm width is depending on the raw material, the film thickness and the processing parameters.
Is it possible to produce and wind films with a thickness range of 15 – 150µm, the maximum winding diameter for 6“ winding shafts is 800mm (full width), 650mm (part bobbins) and 600mm (full width) 420mm (part bobbins) for 3“-winding shafts, the maximum number of part bobbins is 5 pices.

+ CLOEREN 3 – Layer Feedblock FG/SP H
+ CLOEREN Automatic flat die – H 3000 mm
+ SML CS 350/3200 Cooling and take-off unit
+ EUROTHERM Thickness measuring unit
+ Edge trim device
+ SOFTAL corona treatment system

Electro cabinets
– Container for electric equipment
– Control cabinet – material feeding
– Main control cabinet with SML-B&R control unit
– Control desk – cooling and take-off unit
– Control cabinet – Thickness measuring system
– Control cabinet – Corona treatment system
– Control desk – Winder
– Control desk – Bobbin carriage